I think your bed is warping slightly as it heats up, which is normal. Set your bed temp to 105 for half an hour before starting your print and see if it still happens. If you have a V0 or other manually levelled printer, get the bed to 105 before levelling.

What are your bed temps for PLA and ASA? Does it still happen if you preheat the bed? If you rotate the print, does the rough spot follow the rotation?

An alkaline AA may have more capacity, but the LiPo has lower internal resistance and it’s electrolyte is flammable. The worst the alkaline would do it shorted or punctured is get warm and poop out KOH.

He’s daydreaming about going all Gordon Ramsay on the LKML after the photo shoot.

During CPU startup Transmeta’s Dyson “It” style campaign leading to their first product launch, they widely publicized that Linus was on staff.

Ironically you chose a picture of Linus holding a laptop containing the only product he’s famous for shilling.

“fill angle” under infill settings.

Yep. I can get ASA down to 12% with an ambient 50%RH using that method.

There are some models out there for wedges with reverse Bowden fittings so you can keep it cracked open all the time.

Try running your dryer with the lid propped open a bit. Most Sunlu dryers don’t have a way to get rid of the humid air pulled out of the filament.

Also Professor Charles Javier

J E N O V O

Then they trip balls, see their life flash before their eyes, and become a space baby. Could be worse.

V.35 or IEEE-488

Nah, this is Apple. It’s got to be the most expensive: Lemo medical grade.

N connector to SMA, and hardline to USB-C.

But one of those chonky third party ones with the buttons on the sides, and have a FireWire cable coming out of there too for that 2003 feel

The Interdimensional Hole Of Portals has some fierce competition.

If Waffle Squarf served us Sandbliches but they were not glistening, it would have been enough.

You will certainly not regret eating 220-280 pickles.

Sometimes EDID eeproms are writable from i2c-dev… And sometimes VRM configuration ports too…

It’s the Pentavirate Throne