You should maybe read about the use cases for deduplication before using it. Here’s one recent article:
https://despairlabs.com/blog/posts/2024-10-27-openzfs-dedup-is-good-dont-use-it/
If you mostly store legit Blu-ray rips, the answer is probably no, you should not use zfs deduplication.
Yeah… So I’m in Berlin, and in Germany the internet operators finally are building fiber everywhere. The provider who lays the fiber to our street is Deutsche Telekom, and they promise to pay everything: laying the fiber, bringing it to our house and bringing the fiber to every apartment for a two year monopoly on fiber internet after which it’s up for competition using their cables. What needs to happen next is our landlord (a Swiss company) and house management company to agree on these guys to come in, put little fiber dividers to every floor and drill a hole to the walls so we get the fiber cable to our apartment.
Of course this being Germany, they are very slow on agreeing on that, we might need to go to court and for sure we need to talk to our neighbors who own their apartments to push them a bit. I’d expect us to get the connection maybe before end of 2025. But eventually it will happen…
I am doing exactly the same as what the OP is doing. In addition to that, I will unify my beelink mini PC proxmox server and our old Intel atom NAS into one rack server with AMD EPYC, proxmox and truenas in a VM.
I sure hope our landlord and the Internet operator can agree on the operator finally bringing fiber cables to all apartments. Then I would have fast enough uplink to my homelab.
Steely Dan. The worst part would be I won’t stop talking about the drum solo in Aja.
https://www.tomshardware.com/reviews/tn-panel-twisted-nematic-definition,5767.html
Old thinkpads let you to save 20 euros to get a TN film panel to your company laptop. Great for bean counters, awful screens to look at. Never buy these, always get an IPS screen.
One rule of thumb is to be really sure it doesn’t have a tn film screen. IPS at least and even those were really bad up until T490 etc. X1 series has better screens, but you cannot upgrade almost anything to those.
I’m coming from the old ages of internet where we didn’t have them. I’m fine with them, but I’m too old to use them comfortably.
It’s fine. Use them if you like, but I don’t really see the value in systems such as Discord where you pay money to have special emojis and so on…
I’ve been digging into the settings of this printer and, sadly the only send it can do is as a fax… It’s the entry model, been serving us for years very nicely. It even connects to the internet, but misses features such as email, smb or ftp. For me this looks like something an open source firmware could fix. It has enough processing power to possibly run a lightweight Linux distribution, so installing one that would enable modern communication protocols doesn’t seem impossible.
This was it for me now, installed paperless-xng, set it up to scan my email folders, copied all random PDFs from my “organized” tax folder and scanned the rest.
Too bad I just happen to have that Brother printer/scanner without SMB or FTP support. So I need to go through the process of scanning on my computer first, then uploading.
Of course. My setup now is a Proxmox server + a NAS. What I’m planning to do is to install a service for this to Proxmox, then have the files synced over NFS to the NAS, which then backs them up every night to Backblaze. And of course I need to have the paper copies too, but to be able to search, tag and archive the documents is great when you need to remember a thing X that was mentioned in a paper I got back in 2014.
It just doesn’t feel right to have multiple postgres databases running, if every other service uses the one in the network. Having already monitoring, disk space and backups set…
Installed it because of this thread to my homelab today. I never really managed my phone images in any way, never uploaded them anywhere. This was the first time. About 5 gigabytes of images and videos were synced to my NAS in a few minutes, now I can search them and all that. It’s a pretty cool setup, although the installation is a bit tricky if you don’t go to the path they give you. I run a Postgres server in Proxmox, and you have to install just the right version of pgvecto.rs for the system to work.
Browsing the issues I was able to figure out what went wrong, and after downgrading, no issues.
Cloudflare R2 is the cheapest here, it’s free for some gigabytes and egress is free too.
To be honest, I’d just disable image uploads…
As said in the thread, you need some kind of tunnel that stays up and doesn’t need to be fixed if the internet goes down.
Wireguard, or if wanting super easy setup, Tailscale version of Wireguard is great for this. Now you have a private IP address in your VPN network to your home server, that stays up and answers to HTTP. Next thing you need is a cheap VPS somewhere with a public IP address. When that is running, and is in the Wireguard network so you can access your home server from the VPS, you need a Nginx proxy in the public server. Either do it by hand, or use a service such as the Nginx Proxy Manager to handle the proxy setup.
How it basically works is you register a domain name (A, CNAME) to the public VPS service, then with Nginx you setup that anything coming in to the domain X should be proxied to the VPN IP address Y and port Z. Now you can add HTTPS to this domain and get a Let’s Encrypt certificate for it. You can, again, do this manually with Nginx, or let Nginx Proxy Manager handle it for you.
Finally. Stay safe. If you really open services to public internet from your home, be very sure to have all the latest updates and use strong passwords in all of them. Additionally, you can use the home services directly from the Wireguard/Tailscale network by accessing them using the private IP addresses. Your computer should just be in the same network with them.
I’m running it in my homelab for projects I do not (yet) push anywhere public, and projects containing private items such as ssh keys. It is snappy and has a ton of features. I can imagine when the federation support works, one can set up their own git forge and contribute more easily to other forges no matter what software they run.
And, to be honest, that is already how git works if you use the email workflow. Here we just get a web based flow with federated issues and pull requests. But if email is enough for you, you can have a full federation with email and git.
Or AMD 6000 series if power draw and quietness are important. Add Proxmox with ZFS to run all your apps in containers or VMs.
Me too. Although I will not cry if Stubb takes the presidency. Will not vote for him, but it will not be the end of the world either.
I really try to move to Jellyfin, but there’s always some papercuts that block me. Tried it last weekend again, and:
I also tried Navidrome for music. Weirdly it had hiccups playing some files, and DSF was again a problem.
I really want to get out from Plex, but I use Plexamp so much and it handles my huge music library really well it’s hard to switch :(