Gotta make sure everyone’s prepared for WW3.

They actually just aren’t allowed caffeine. It’s a “mind-altering” substance according to them. So they can drink hot cocoa, but only if the chocolate has been de-caffeinated.

Source: my old roommate was a “Jack” Mormon.

Damn, yeah he looks 60 at most. I guess magical underpants or whatever will do that for you.

Have none of these people watched, like, any sci-fi movie ever?

Have you been on Twitter recently? I kept getting white supremacist and MAGA tweet notifications left and right. I only followed progressive pages and random bands and music festivals. I even tested it out - blocked a high profile Nazi that I kept getting tweet notifications for - sure enough, got a notification for that same Nazi. It’s a Nazi platform, 100%. Are you a Muskrat apologist/dickrider or something? Because that’s what you come off across as. I’ve seen it with my own eyes, dawg.

Are you one of those weirdos that actually looks at comments on YouTube? There’s your problem.

Who is being entitled? This guy is saying he’s supporting the Nazi platform because his sports ball people are still on there. I told him that’s a bullshit reason to stay on a platform.

Who cares? Do they not have a website, or a YouTube show or something? There’s still plenty of entertainers I like on there. Didn’t stop me from deleting that Nazi cesspool and just getting that info elsewhere. You just have to want to actually quit and quit coming up with excuses. Sports ball is on other platforms, too.

These guys are fine, but a lot of their fans are the worst. They can’t make their own judgement of a movie. I know several people that will go see a movie with me, then say they can’t talk about it and don’t know how they felt about it. Then, when RLM releases their review, they suddenly have all of the exact same opinions and talking points. Looking at you, Brian, in case you wondered why I don’t go to movies with you or talk to you about them anymore.

Film snobs with no opinions of their own.

This was a joke looooong before TikTok even existed. It’s a Das Racist song from back in the day.

Yeah but this disposable item in general seemed to be custom made for that purpose lmao

I doubt he even has any PJs.

I have an Ender 6, which is a super common printer. Not on the same level as the 3.

Voron isn’t an application, though. It’s a type of printer.

Novel or bespoke printer? Not sure what you’re talking about, but it’s supposed to be universal firmware. There are plenty of guides out there and folks running Klipper on all sorts of printers, including mine. They just aren’t well-written, or aren’t written for beginners, or assume you’re a pro that doesn’t need anything explained.

This is exactly what I’m talking about with the 3D printer community. I’ll say one thing, and then someone will say something completely unrelated in response, like you just did.

I ask, “Hey, can anyone with (insert my specs here) show me their Klipper config or Slicer profiles for reference?” and I get 100 responses asking me why I’m using the hardware I’m using, recommending me other hardware that they like, telling me to use a different slicer that they like better, telling me if I don’t tell them my issue or show them pics of my prints they can’t help me (I never asked for help with prints, just to look at someone’s config with similar hardware), downvoting me for not already being a 3D printing pro, and just generally being unpleasant and literally answering anything but my question.

I work in tech. I’m used to Googling answers, hitting up forums, digging through old posts, etc. It’s about 50% of how I get my job done. There is something fundamentally wrong with the majority of the 3D printing community.

Not bashing this community specifically, as it’s too new to judge and so far people seem helpful and nice, but this is a problem I run into everywhere I turn to for assistance, like GitHub, Reddit, Printables, and various other manufacturer forums. The 3D printing community is pretty dogshit.

Let’s make this a much better community than literally everywhere else (which shouldn’t be difficult at all). When you post your setup, post your full specs with your firmware config and slicer settings. Is there a way we can tag ourselves or add a profile/signature? Maybe we can even put links to our specs.

So much of the 3D printing community seems to want to kill it by scaring off all newcomers. We can make this place the definitive stop for 3D printing knowledge, questions, and configs, but it’s going to take the work of some mods and the entire community to get there.

Share knowledge like the rest of the tech enthusiast world. Your Klipper config isn’t some super secret proprietary code for your eyes only. You don’t have to guard it like it’s your virginity. This hobby is going to die outside of super corporate builds with zero after market parts or builds like the Bambu X1 if the 3D printing community as a whole doesn’t learn how to share and not be a dick.

At this point, if you get an Ender 6, Manta E3EZ+ CB1 EZ2209 drivers, I’ve got you on my config and setup instructions. Otherwise, I would stick to a printer like the Bamboo X1 that does all of the slamming your head against your printer for you.

Klipper is great… Once you get it working. Way better than Marlin, but good luck getting it to work.

I swapped my motherboard for a BTT Manta + CB1 + EZ2209 drivers. Took about 7 months to get it to a state where my prints are regularly okay. Every 3D printing community I’ve come across is less than helpful, and all Klipper documentation is written like you’re already at a pro level, as does pretty much every other guide out there. People will swear it’s so easy, but you know what helped after 7 months of tinkering? Myself just throwing everything I have at my config in hopes of something working.

What kind of printer do you have?

Jesus, what an insufferable moron.

Putin or Mr. Jewish Nazi himself, Steven Miller. He’s both a traitor to his country and his people!

Rule of law is completely dead in this shithole country if he doesn’t get, at minimum, thrown in prison.

What movie?

True haha, but they’re pretty close to China and Japan. Not an ideal place to be when China goes crazy (er).

We’ve got something like the largest 3 navies and air forces in the world between all of our branches, and the most cutting edge military tech. Also, after these Congressional hearings over the past week or so, we apparently have alien tech on our side too lmao.

Personally, I’m halfway hoping for a civil war or, preferably, the South just splits off into it’s own shithole again. But I wouldn’t mind seeing us finish what Sherman started.