Is it possible to learn this power?

You’re welcome :)

This is quiet normal and not an error. It’s the Z-Seam, caused by the printer when finishing a layer and briefly stopping the printhead, before lifting it along the Z-Axis to the next layer.

Here you can find more about this effect and how to reduce it.

Lol its facial expression doesn’t help either

Once you’ve seen how the heater cartridge melts the aluminium hotend and liquid aluminium setting everything on fire, it drops onto, you never print unattended again! For longer prints I always wait until the weekend, before starting it. As well I pause the print and turn heatbed and the nozzle heater off, before heading to bed. This method isn’t perfect, as it adds another possibility for failures, but until now it worked everytime. My last print succeeded after ~28h (print time only) this way. Another option is, to divide your model into smaller parts, which are easier to print and glue them together, when everything is finished.

My favourite game back the days. Although it was kinda hard and I never managed to land an ollie lol.

Oh ok, I didn’t notice this. Then it will surely work haha

Just turn it to the other side and it will be totally ok. So 250$ sounds pretty fair.

I don’t have this printer, but the Ender 3 1st Gen. So here are some suggestions for things, I’ve noticed on mine.

• NTFS doesn’t work. So did you format the SD card with FAT32?
• Is your SD card maybe too big and did you try smaller cards, with 4GB capacity for example?
• Depending on your PC and the Mainboard of the CR10 you might need an FTDI driver to get it work. Did you check, if your OS recognises the printer in the device manager (Windows) or with lsusb (Linux)?

Not a single word how they may filter anything. Looks like a usual PLA print and a total scam. They look nice, but that’s it in my opinion.

Holy crap, that came unexpected xD

Omg this is terrifying! His face as well as the fact that he’s heading for the fediverse.